Series 22 CB Reef Cars Product No. Description A (mm) B (mm) C (mm) D (mm) E (mm) Weight (g) RC42272 86mm x 47mm, suits standard mast tracks 86 34.1 45.6 - 42.4 224 RC42272L 86mm x 47mm, suits Luff Groove tracks 86 34.0 46.0 32.0 47.0 224   RC42269 - suits Standard Mast Tracks RC42269L -...
SPECIFICATIONS A: 130.0 mm B: 33.0 mm C: 45.0 mm D: 32.0 mm E: 57.5 mm Weight: 360 g   FEATURES Low profile Lightweight alloy car bodies   PRODUCT INFORMATION Car bodies are machined to precise specifications, then honed to an exceptional finish before being treated and anodised...
SPECIFICATIONS A: 90 mm B: 37 mm C: 49 mm D: 28 mm E: 52 mm Weight: 230 g  FEATURES Captive Low profile Lightweight alloy car bodies  APPLICATIONS Monohulls to 22m (72ft) or sail area 105m2 (1130 ft2) Multihulls to 16m (53ft) or sail area 83 m2 (893 ft2) Suits Series 26 track...
SPECIFICATIONS A: 119.0 mm B: 43.0 mm C: 56.0 mm D: 37.0 mm E: 58.0 mm Weight: 545 g   FEATURES Captive Low profile Lightweight alloy car bodies   PRODUCT INFORMATION Cars run on twin races of captive Torlon® ball bearings and captive slide rods, for easy loading &...
SPECIFICATIONS A: 216 mm B: 74 mm C: 94 mm D: 60 mm E: 126 mm Weight: 3000 g    FEATURES Low profile Lightweight alloy car bodies   PRODUCT INFORMATION Car bodies are machined to precise specifications, then honed to an exceptional finish before being treated and anodised...
SPECIFICATIONS A: 98 mm B: 29 mm C: 38 mm D: 37 mm E: 39 mm Weight: 151 g   FEATURES Captive Low profile Lightweight alloy car bodies   APPLICATIONS Long Cars: Monohulls to 15m (50ft) or sail area 53m2 (570ft2) Long Cars: Multihulls to 12m (40ft) or sail area 46m2 (495ft2) Short...
SPECIFICATIONS A: 90.0 mm B: 36.0 mm C: 48.0 mm D: 28.0 mm E: 69.00 mm Weight: 285 g   FEATURES Low profile Lightweight alloy car bodies    PRODUCT INFORMATION Car bodies are machined to precise specifications, then honed to an exceptional finish before being treated and...
SPECIFICATIONS A: 130.0 mm B: 43.0 mm C: 56.0 mm D: 37.0 mm E: 76.4 mm Weight: 534 g    FEATURES Low profile Lightweight alloy car bodies   PRODUCT INFORMATION Car bodies are machined to precise specifications, then honed to an exceptional finish before being treated and...
SPECIFICATIONS A: 170.0 mm B: 56.0 mm C: 71.0 mm D:   - E: 96.0 mm Weight: 1135 g     FEATURES Low profile Lightweight alloy car bodies   PRODUCT INFORMATION Car bodies are machined to precise specifications, then honed to an exceptional finish before...
Color:- any one colour for your rego letters from colour chart, no background for this sticker. We are using the high-quality marine-grade premium cast vinyl material to make this sticker. Special marine grade premium cast vinyl.
Accepts one layer of fabric withSP4 eyelet. Suits Marine Canopies, Biminis, Side Curtains, Tents, Bags, 4WD Canopies, Caravan Annexes, Blinds, Awnings etc. Specifically designed for marine & outdoor applications!
★ 7mm x 10m Dyneema Rope. ★ 3 Speed Gearing 17:1/5:1/1:1. You can be sure you will get the right support and advice from us.
Designed to be retrofitted to your existing bung, simply remove the drain plug and housing, then install the Underwater Bung Light, no new holes required. Replaces Bung, Designed specifically to retrofit into the 20mm bung location.
Santoprene Diaphragm. Primimg Capabilities: 1.8m Suction Lift. 12V Operation. Pump may have water left in there due to manufacturer internal quality check. Run Dry Safe. Up to 3.0 GPM. 16 AWG, 9.4" long width.
NOTE: These switch panel housings are a genuine qualityAustralian-Made product - Don't settle for inferior products on the market. (Front panel & shroud can be used alone and flush mounted onto consoles or panels if desired).
[CDATA[
WE MAKE YOUR PERSONAL REGO'S! Size of each decal will be 580mm X 150mm. These are made from 1 colour only, the colour of your boat will be the background colour. Using industries best ROLAND SIGN CUTTER.
※Type: Car Power Inverter( 21 10.2 5.8cm ). 1Pcs DC12V To AC 240V Power Inverter. ※ Rated power:1 0 00W. ※ Peak power: 2 000W. ※ Continuous Power: 50 0 W. We always try our best to resolve the issues.
Easy to mount - Each light requires a small pilot hole (for pilot locator and wires), and 1 screw hole. Current draw: Only 75mA. They produce virtually NO HEAT, preventing the distortion of lens covers.
Mooring Cleat & Bollard. hinge& Locker Handle. ventilation vent. rod holder. Material: Marine Grade Stainless Steel. We will try our best to reduce the risk of the custom duties. Height overall including drain fitting : 3-1/4" (82mm).