Samsonite Guardit 2.0 reinvents the core functionality of personal mobility with a brand new design, combining the convenience of an everyday laptop-carrying bag with an even sleeker and professional
The RAM-202U-153 consists of a 1.5" diameter rubber ball connected at right angles to a 1.5" x 3" rectangular base. This mount has pre-drilled holes at each corner of the base plate.
The RAM-202U-22 contains a 1.5" diameter rubber ball connected at right angles to a 2" x 2" square base. This mount has pre-drilled holes at each corner of the base plate.
RAM C Size 1.5" Ball on Rectangular Plate with 1.5" x 2" 4-Hole Pattern Description: The RAM-202U-225 contains a 1.5" diameter rubber ball connected to a rectangular plate with a 4-hole pattern of 1.5" x 2" center to center. Overall plate dimensions are 2" x 2.5". Note: The "U" in the part number...
Rectangular plate base 2 x 4 inches with a 1.5 inch ball. This mount has pre-drilled holes at each corner of the base plate.
The RAM adapter base includes a 1.5" diameter rubber ball and inserts directly to the back of Lowrance Elite 5 and Mark-5 Fishfinders. The adapter serves as a quick release mechanism, allowing you to remove or transfer your Fishfinder in seconds. Compatible Models: Lowrance Elite-5 Lowrance Elite-5...
Ram 1.5" ball with 2.5" base with standard AMPS hole pattern, and marine pattern. This part is slightly different than the usual ball mount - it has a female 5/16"-18 hole in the bottom.
The RAM-202U-RYM1 consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. The base has pre-drilled holes, including the universal AMPs hole pattern. Included are (3 quantity) (#8-32 x 3/4" PH PD Mach Screws) and (3 quantity) (#8-32 SS Nylock Nuts) that will connect the...
RAM® Tripod Base with Ball Description Three legs attach to the RAM-202 evenly around the 2.5" diameter plate. The legs are connected by screws that fit through the holes on the RAM-202. There are wing nuts on the end of the screw so they can be tightened by hand. At the top of the RAM-202 is a...
C-sized 1.5" Ball with Male 0.5" NPT Threaded Post. Please note that these NPT threads are significantly different in size from standard measurements and are only compatible with other NPT parts of the same size.
RAM Mount Aluminum 1.5 inch Double or Triple Ball on 2.5 inch Base with 0.62 inch Hole.
Double 1.5" standard ball with female 1/2" NPT thread. Please note that these NPT threads are significantly different in size from standard measurements and are only compatible with other NPT parts of the same size.
Consists of a 1.5" ball and 0.5" NPT female thread. This part connects to the RAM-PA82xx series with a 1/2" NPT thread, and then connects to any RAM part with the 1.5" socket. Please note that these NPT threads are significantly different in size from standard measurements and are only compatible...
1.5" (38mm) Ball attached to a twist action lock suction cup.
Allows you to connect two sockets together, to give you just that extra little bit of length.
The u-bolt is adjustable to fit diameters of 0.75" to 1.0". The rubber ball is 1.5" (38mm) in diameter.
RAM Rail Base with Zing Coated U-Bolt, ATV/UTV Strap & 1.5" Ball for Rails to 3.15" in Diameter About: Designed for a clean installation, RAM-231Z-2U base accommodates most common tubing sizes on UTV’s and ATV's, allowing for the placement of the RAM rubber ball base. Safely concealing a strap...
2.5" diameter base with 1/2" NPT female thread at a 90 degree angle to the base. This part connects to any 1/2" NPT male thread, including the RAM-PA82XX rigid arm series.
Hollowed adapter plate (U shaped) with rubber sheet for shock absorption, for plate, ball and clamp system.Allows you to connect your RAM mount to a rail.Suits the RAM-202 and RAM-B-202 round bases.
RAM® Double U-Bolt Ball Base for 1.25" - 1.5" Rails Zinc-coated double U-bolt base accommodates rails from 1.25" to 1.5" in diameter Included C size 1.5" RAM® rubber ball allows for connection to any C size RAM® double socket arm; ball and socket technology allows for near-infinite adjustability...
RAM® Double U-Bolt Ball Base for .75" - 1" Rails The RAM-235-2U consists of a double u-bolt base with 1.5" diameter ball and two zinc-coated u-bolts. The double u-bolt base will accommodate rails from .75" to 1" in diameter.