Samsonite Guardit 2.0 reinvents the core functionality of personal mobility with a brand new design, combining the convenience of an everyday laptop-carrying bag with an even sleeker and professional
6" Swing Arm Extension with Pipe Connection.Designed to be used in conjunction with the RAM-261-2.
6" Swing Arm with Double 1.5" (38mm) Ball.Designed to be used in conjunction with the RAM-261-1.
RAM® Ratchet & Swing Arm with 1/2" NPT Hole and Single Socket Arm Ratchet & Swing Arm with 1/2" NPT Hole and Single Socket Arm.
RAM Short Extension Swing Arm with 1/2" NPT Post and 1/2" NPT Hole Specs & Features: Material: Powder Coated Marine Grade Aluminum Note: The "U" in the part number reflects product packaged in poly bag. Weight: 1.14 KG (2.5 lbs)
Swing arm with single socket pedestal and 1.5" (38mm) ball size opening at the other end.
RAM Mount Aluminum John Deere JO1 PF11019 Base Post with 1.5 inch Ball. Compatible with the GS2600 & GS2630 John Deere displays
Aluminium rail clamp mount with 1.5" (38mm) ball. Suitable for rails between 1.25" to 1.88" diameter.
RAM 2 to 2.5" Diameter rail base with 1.5" (38mm) ball.
RAM 1.5" Ball with 2.5" Long 1/4-20 Thread Part RAM-273U C-Size Ball with 2.5" 1/4-20 Thread Material: Powder Coated Marine Grade Aluminum Ball Size: 1.5" Rubber Ball Size Note: The "U" in the part number reflects product packaged in poly bag. Weight: 72.5 g (0.16 lbs)
125mm x 125mm Base with female pivot teeth - used with RAM-281 or RAM-284 for adjustable connection to pedestal or post, and ball/clamp system.Can bolt to floor-board/console/transmission tunnel.
A 5" x 5" single cast mounting base with central spigot for RAM-290 and other post-type systems.For a multi-angle equivalent, check the RAM-281 and RAM-282 parts.
Aluminium cast, adjustable female 1/2" pipe clamp with male teeth pivot tightening lock.Normally used with RAM-282 125mm square screw down base, and RAM-PA8209, 8212, 8218 pipes.
Triple Ball base to suit any RAM component that takes a standard size (38mm) ball. Balls are 120 degrees apart.
Tube 2000 holder with Bulkhead Mount. Designed to hold fishing rods.
POD I for attaching RAM components in a vehicle, using a passenger seat front mounting rail bolt. No drilling necessary. Just remove the seat mount bolt, and re-insert with the slotted adaptor in place. The bendable aluminium rod is supplied with a C size clamp set to attach to other RAM components.
This is a PODIII for attaching RAM components in a vehicle, using the passenger seat front mounting rail bolts.No drilling necessary. Just remove the seat mount bolt, and re-insert with the slotted adaptor in place.The bendable aluminium rod will then lock in to the round receptor, and the upper...
Designed for use with the RAM-316-3A Tri-Flex Arm.The pipe can connect to swing arms (RAM-261-1 and RAM-261-2 etc), and the base is designed to connect to the RAM-316-3A.
RAM Forklift Overhead Guard Plate About: The new RAM Lift Truck Back-Up Mounting Plate is the ideal way to get a RAM ball attached to most any lift cage or overhead guard. Utilizing two identical plates of stamped steel with numerous common hole patterns and slots makes attachment a breeze. Three...
RAM Forklift Overhead Guard Plate with C Size 1.5" Ball Sometimes the simplest solution makes the most sense. The new RAM Lift Truck Back-Up Mounting Plate is the ideal way to get a RAM ball attached to most any lift cage or overhead guard. Utilizing two identical plates of stamped steel with...
C-sized 1.5 inch ball on 0.25"-20 hole.