- Will charge both RFD8500 and TC55 batteries simultaneously. - Cradle can also be used to charge RFD8500 or TC55 units independently. - LED status indicator on charger base will show charge status of RFD8500 battery. Refer to charge status LED on the TC55 for its charging state. - NOTE: Charging...
CRADLE 4-SLOT CHARGING FOR RFD8500 & TC51. REQUIRES PWRS-14000-241R & COUNTRY SPECIFIC AC LINE CORD (SOLD SEPARATELY). CHARGES 2X RFD8500 & 2X TC51.
USB cable, provides fast-charge when a MC33 PP+ battery and a wall adapter is used, it also allows USB communication to the device when connected to a PC
5Slot charge only cradle, charges up to five devices.
CRD-TC7X-SE2CO1-01 - Provides USB/Ethernet and Charging in left cradle slot and Charge-Only in right cradle slot - Compatible with TC7X with a hand strap and Stylus attached - Left cradle slot NOT compatible with Snap-On accessories attached (e.g. MSR, Trigger Handle etc…) - Left cradle slot...
4-Slot Terminal Charger with 4-Slot Battery Charging.
5-Slot Terminal Charger.
4 Device Charge Cup (sold separately from the charge base) can be installed on any Single, Double or 5 slot charge base.
4 Battery Charge Cup (sold separately from the charge base) can be installed on any Single, Double or 5 slot charge base.
Workstation Docking Cradle - An enhanced single-slot charging cradle allowing users to use the TC5X as a workstation or kiosk. - Two USB ports are located on both sides of cradle. One port provides 1.5A current. The remaining three provide .5A current. - Also includes Kensington port to secure the...
Rugged charging cable for TC55; requires PWRS-124306-01R, sold separately.
Charging requires Power Supply PWRS-14000-249R and country-specific two-wire ungrounded AC power line cord, purchase separately.
Kit includes: Single Slot Cradle CRD3000-1001RR, Battery Adapter ADP-MC32-CUP0-01 and P/S PWRS-14000-148R. Must purchase country specific 3 wire AC Cord separately.
Charging Cable Cup with Cigarette Lighter Adapter Provides a smaller footprint for charging TC7X in the vehicle via a cigarette light adapter. Connects to charge contacts on bottom of TC7X. Can be used at same time as Snapon accessories, including Pistol Grip Trigger Handle. Coiled portion of cable...
CBL-TC2Y-USBC90A-01 USB-A to USB-C cable. Attaches to USB-C port on the bottom of the device or to the Single Slot Base Charge-Only Cradle (CRD-TC2XBS1CO-01). Can be used to charge the TC20 via USB connections (PC, USB AC Wall Outlet adapter, USB Cigarette Lighter adapter). Cable length is 1.5M (~5...