RAM® Ball Adapter for Fusion Stereoactive (B-Size) Description: The RAM Mounts Fusion StereoActive adaptor connects your waterproof, Bluetooth speaker anywhere on your boat, camper or wherever you want it using RAM Mounts. The B-sized adapter will work with the RAM Mounts gear you already have....
RAM Marine Electronic Adapter Base with 1" Ball for the Eagle Cuda, Fish Easy, Humminbird Piranha & Lowrance X-4 Description The RAM-B-107-1BU is a marine grade aluminum base with 1" rubber ball. The base connects to the underside of Humminbird, Eagle and Lowrance marine GPS devices. Note: The "U"...
RAM® Aluminium Pin-Lock Ball Adapter with 1/4"-20 Female Thread - B Size Includes 1" B size rubber ball with pin-lock and 1/4-20" threaded hole Features patented RAM® Pin-Lock™ pattern on the bottom so it will lock up with other RAM® Pin-Lock™ components Made of marine-grade aluminium for...
RAM® Tough-Mag™ 88MM Diameter Diamond Ball Base - B Size Magnetic base contains 2-hole AMPS pattern with M4 threaded inserts for attaching B or C size RAM® 2-hole AMPS diamond ball bases Includes B size (1") RAM® 2-hole AMPS pattern ball base for connection to any B size RAM® double socket arm;...
RAM® NFC Reach™ NFC Extender with Dashboard Mount Includes 2.10" x 2.60" steel backing plate with B size RAM® double ball mount and NFC repeater NFC repeater extends to 30cm of reach and attaches to the back of select RAM® and GDS® tablet docks Supports passage of data to a device from cards, tags,...
RAM® NFC Reach™ NFC Extender with Drill-Down Double Ball Mount Includes drill-down B size RAM® double ball mount and NFC repeater NFC repeater extends to 30cm of reach and attaches to the back of select RAM® and GDS® tablet docks Supports passage of data to a device from cards, tags, buttons, etc;...
RAM® Double Ball Mount with Backing Plate 2.10" x 2.60" steel backing plate attaches to a variety of RAM® Mounts ball bases 2.5" round plate with B size 1" RAM® rubber ball connects to RAM® device holders containing the universal AMPS hole pattern; includes B size medium length double socket arm...
Locking the knob will disengage the screwing mechanism on your RAM mount, so that once the knob is in place, it can not be removed without unlocking. This is perfect to secure your RAM mount to your vehicle without having to worry about anyone being able to remove it. Suits 1" socket arm.
RAM® Swing Arm Knob RAM® Swing Arm Knob with 3/8"-16 Brass threaded insert. Made of high strength composite, commonly used for tightening down between to swing arms, among other uses.
This mount consists of a plastic diamond plate connected to a 12" flex arm with a Locking 3.25" Suction Cup on the base. The ends are permanently connected to the flex arm ends.
15cm flexible arm with diamond plate and large suction cup at one end.The diamond plate is the same size as the the RAM-238U so will attach to RAM plastic holders/cradles, and suction cup arrangements, or to the weighted non-slip mount (RAP-279).
15cm flexible arm with two diamond plates attached to either end.These diamond plates are the same size as the the RAM-238U so will attach to RAM plastic holders/cradles, and suction cup arrangements, or to the weighted non-slip mount (RAP-279).
This 6 inch flexible arm has a plastic diamond plate at one end, and a 2.5" round pate at the other end.
This 6 inch flexible arm has a 2.5" round plate at either end.
The locking 3.25" Rubber Suction Cup Base has a standard RAM double hole diamond shaped end. The suction cup is designed to have an extra strong hold on any smooth non-porous surface. The diamond shaped end has two holes 1.912" from center to center, for connection to nearly all RAM holder cradles...
Belt clip to hold most RAM holder cradles that have the RAP-272U or RAP-277 attached to them.
The High Strength Composite Universal Plate has a 1.0" diameter Round Male Button on an Octagon Neck connected at right angles to a 1 1/4" x 2 1/2" Diamond Plate. The plate has two holes 1.912" from center to center, positioned at either tip of the diamond plate. This base plate will attach to any...
Semi-permanent adhesive pad mount with diamond plate on top to connect to any other RAM component with standard sized diamond plate RAM-238U.
The RAP-274-1BU is the cradle connector that is included with the RAM EZ ON/OFF High Strength Plastic Composite Handlebar Rail Mount. This extra connector allows you to connect a second cradle to the EZ ON/OFF mounting base.
A rail mount designed to fit rails up to approx 2.6cm in diameter. The plastic diamond plate swivels, and can be tightened once the desired position has been achieved. Connects to any of the RAM Composite HOL Cradles or any other cradle with two holes positioned 1.912" center to center.